ADA Safety Floor

833-ASE-4YOU

954-943-0566

Service Available In Multiple Languages:

ADA SAFETY FLOOR

Modern resurfacing solution for ADA compliance

Advantages of using ADA Safety Surface

SEMCO ADA Safety Floor has a 5-year manufacturer limited warranty. Initial cost of the SEMCO ADA Safety Floor is 68% less expensive than MMA (Quartz) Flooring. The initial cost comparison between SEMCO and cool deck is very comparable, at the 5-year benchmark cool deck must be reinstalled ultimately increasing its long term cost.

Coefficient of Friction

Semco ADA Safety Surface COF 01

Slip and fall risk reduction

Slip resistant flooring is an important element of ensuring a public access floor is compliant with ADA regulations. Currently a floor must have a minimum coefficient of friction (COF) of 0.60 for standard flat flooring, where sloped or ramped surfaces exceeding a 2% slope requires a 0.80 COF. Utilizing the SEMCO ADA Safety Floor with Remodel without Removal™ ADA compliant flooring can be created on any solid flooring product. The SEMCO ADA Safety Floor provides a slip resistant floor that can be used for standard flooring or ramped surfaces. The SEMCO ADA Safety Floor maintains the same dry slip resistance when wet.

Surface Slope Regrading

Semco ADA Safety Surface slope2

Regrading without the need for demolition of existing surface

To be in compliance with ADA regulations, a public access floor must not exceed a slope of 2%. A common area floor that has sloping exceeding 2% must be addressed as a ramp, which will require flooring rated no less than 0.80 COF. The SEMCO ADA Safety Floor is applicable from as thin as 1/32” to 6”. With the SEMCO ADA Safety Floor a floor slope can be adjusted without extensive demolition or removal of existing flooring.

Surface Aperture Closure

Semco ADA Safety Surface aperture2

Meet sub-surface movement and ADA requirements

Public access flooring that has drains, grout lines, to control joints, must not have any apertures exceeding 1/4”. A specific concern is control joints, concrete control joints are specifically designed to control concrete cracking, and it is very common for a control joint to easily exceed an aperture of 1/4”. SEMCO ADA Safety Floor can resolve this situation. Having a strength reaching up to 10,000 PSI, the SEMCO ADA Safety Floor can fill an aperture while still maintaining floor strength and integrity.

ADA SAFETY FLOOR

Modern resurfacing solution for ADA compliance

Advantages of using ADA Safety Surface

Coefficient of Friction

Slip and fall risk reduction

Surface Slope Regrading

Regrading without the need for demolition of existing surface

Surface Aperture Closure

Meet sub-surface movement and ADA requirements

Available Colors and Installation

Blanco

ADA Safety Floor

Silver Stone

ADA Safety Floor

Grey Marble

ADA Safety Floor

Sandy Beach

ADA Safety Floor

Brown Slate

ADA Safety Floor

Copper

ADA Safety Floor